Designability WizzyBug Instructions For Use Manual Download Page 63

Page: 63 / 72

Problem

What to do

If this does not work

7. The joystick battery

indicator shows the
last red light

(Shark/DX).

Turn off all power (including

the lights) and recharge the
battery.

Stop using Wizzybug

and phone
Designability for help.

8. The joystick turns on
then lights scroll right
to left, joystick beeps
and turns off

(Shark).

The joystick has been locked.
Turn it on again and press the
horn button 3 times quickly.
This will unlock the joystick.

Stop using Wizzybug
and phone
Designability for help.

9. The joystick
controller is not
working. The spanner
light flashes on the

joystick

(Shark).

Turn the joystick controller
off and on again. If the
spanner is still flashing, then
it is displaying a fault code.

Count the number of
flashes in each
sequence and phone
Designability for help.

10. The joystick
controller is not
working

(DX).

A red key

symbol is flashing.

The joystick is locked

–

use

the blue magnetic key
(supplied with Wizzybug) and
slide it over number display to

unlock it.

Count the number of
flashes each sequence
and phone
Designability for help.

11. The joystick
controller is not

working

(DX).

A green

key symbol is flashing.

If speed setting 4 or 5 are
selected, press the speed

button repeatedly until it
shows 1, 2 or 3. (4 and 5 are
only used if your child drives
Wizzybug using switches). If

the speed setting is correct, it
is flashing a fault code.

Count the number of
flashes in each

sequence and phone
Designability for help.

12. The seat is not

properly fixed into the
Wizzybug body and/or
the white dial cannot
be locked.

1. Check that the front

corners of the seat sit in both
metal slots above the front of
the battery compartment (see
p21).

2. Check that the seat pins are
sitting fully into the holes in
the metal grid (see p21)
3. Take out the seat

completely (see p25) and
check that the seat backrest is
fully located in a colour-

coded slot on each side of the
seat. If needed, reposition the
backrest (see p31) and re-try.

Stop using Wizzybug

and phone
Designability for help

Fig. 83 Troubleshooting

Summary of Contents for WizzyBug









































































Search results

Summary of Contents for WizzyBug

Reviews:

Brands by name

Popular brands

Designability WizzyBug, Instructions For Use Manual

Search results

Summary of Contents for WizzyBug

Reviews:

Brands by name

Popular brands