manualshive.com logo in svg

Designability WizzyBug, Instructions For Use Manual

Share
Download
Designability WizzyBug Instructions For Use Manual Download Page 19

19 

BATTERY 

Fitting the Battery (SLA or NiMH) 

1.

 

Place the battery into the box 
under the seat, with the cable 
coming out from the opposite 
side to the socket (see Fig. 12). 
 

2.

 

Position the connector so that it 
can easily be pushed into the 
socket. Push in the connector 
then turn the collar clockwise to 
secure it. 
 

3.

 

Make sure the battery cable is tucked in, so that it cannot 
damaged and does not stop the seat being adjusted. 

Fitting the Battery (LiFePO4) 

The battery fits into the box under 
the seat, under the black cover. 

1.

 

Open the cover by pinching the 
black tab and white button at 
the front of the cover. 
 

2.

 

Place the battery into the box 
as shown (it will only fit one 
way round). 
 

3.

 

Position the connector with the silver slider down and to the 
left, and push it into the socket. Turn the connector clockwise 
until it clicks. 
 

4.

 

Close the cover fully, 

keeping your fingers clear 

of the hinge

. 

 

Cable 
 
Socket 

Fig. 12 Fitting the SLA/NiMH Battery

 

Fig. 13 Fitting the LiFePO4 Battery 

Summary of Contents for WizzyBug









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands