manualshive.com logo in svg

Designability WizzyBug, Instructions For Use Manual

Share
Download
Designability WizzyBug Instructions For Use Manual Download Page 14

14 

Crossing the road 

The carer should take full control by switching 

to carer control or by disengaging the wheel releases (page 28) 
and pulling Wizzybug by the headrest. 

ENVIRONMENT 

You must stay close to your child until they are confident and 
able to use Wizzybug, especially if there are hazards nearby such 
as furniture, changes in ground levels, or busy areas. A 
responsible adult should always be between Wizzybug and any 
hazard. 
 
Wizzybug prefers firm level surfaces and gentle slopes. Do not 
attempt slopes steeper than 5° (1 in 12). Wizzybug is not suitable 
for driving on steep banks, beaches, hilly ground, or very uneven 
ground. Your child must not drive Wizzybug up a steep slope, 
because it could slip backwards and turn over. 

 

 

Fig. 8 Steepest Slope 

 

Before use

 

Check Wizzybug’s environment for hazards such as 

sharp corners, hot drinks, traps, steps and crushing hazards. 
Wizzybug is designed to fit under nursery tables but may also fit 
under taller tables and/or other furniture. If there is not enough 
space for your child to drive under or between furniture, they 
could get crushed or bump their head.

 

 

5° Incline (or 1 in 12) 

Summary of Contents for WizzyBug









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands