![background image](http://html1.mh-extra.com/html/desa/ironhaus-yellowstone-idvf36hn/ironhaus-yellowstone-idvf36hn_owners-operation-and-installation-manual_2486369023.webp)
www.ironhaus.com or www.desatech.com
123129-01A
23
Figure 36 - Typical Flame Pattern
If the vent configuration is installed incorrectly,
flames will lift or "ghost". This can be danger
-
ous. Inspect flames after installation to ensure
proper installation and performance.
Figure 36 shows a typical flame pattern.
If burner flame pattern differs from that de
-
scribed:
• turn fireplace off (see
To Turn Off Gas to
Appliance,
page 22)
• see
Troubleshooting
, page 25
cLeAninG AnD MAintenAnce
inSPectinG BUrnerS
Continued
WARNING: Turn off fireplace
and let cool before cleaning.
CAUTION: You must keep
control areas, burners and
circulating air passageways of
fireplace clean. Inspect these
areas of fireplace before each
use. Have fireplace inspected
yearly by a qualified service
person. Fireplace may need
more frequent cleaning due to
excessive lint from carpeting,
bedding material, pet hair, etc.
GLASS DOORS
WARNING: Handle glass
door panels with care. Do not
strike, slam or otherwise abuse
glass. Do not operate fireplace
with the glass door unlatched,
removed, cracked or broken.
WARNING: Do not use
abrasive cleaners as this may
damage glass. Use a nonabra
-
sive household glass cleaner to
clean glass. Do not clean glass
when hot.
Glass must be cleaned periodically. During
start-up it is normal for condensation to form
on the inside of the glass causing lint, dust and
other airborne particles to cling to the glass
surface. During initial start-up a slight film may
form on the glass due to paint curing. The
glass should be cleaned several times with a
non-ammonia, nonabrasive household clean-
er and warm water after the first two weeks
of operation. Thereafter, clean the glass two
or three times during each heating season,
depending on the usage and circumstances
present. Refer to
Removing/Replacing Glass
Doors
, page 18 of this manual when removing
glass door for cleaning.
WARNING: Only parts sup
-
plied by the manufacturer
should be used when replacing
broken or damaged glass door
panels (see
Replacement Parts
,
page 34). Glass door panel are
complete units. No substitute
materials may be used.
CAUTION: Wear gloves and
safety glasses while handling
or removing broken glass. Do
not remove if glass is hot. Keep
children and pets away from
glass.
If glass has been broken, carefully remove
glass door (see
Removing/Replacing Glass
Doors
, page 18). Vacuum all glass pieces
with a shop vac.