Stonegate Melrose Dark Cherry Assembly And Operation Manual Download

Page: 1 / 17

ELECTRIC FIREPLACE HEATER

ASSEMBLY AND OPERATION MANUAL

IMPORTANT SAFETY INSTRUCTIONS

CAUTION / ATTENTION -- DO NOT PLUG THE HEATER INTO ANY POWER
OUTLET OR OPERATE BEFORE READING ALL INSTRUCTIONS!

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric

shock, and injury to persons, including the following:

Read all instructions before using this fireplace. Failure to follow these important safety instructions may

cause fire, electric shock or damage. Following proper safety and operating instructions is the

responsibility of the owner.

WARNING: This fireplace heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.

The grill directly in front of the heater outlet becomes hot during heater operation.

CAUTION – High Temperature. Keep any materials, such as upholstered furniture, pillows, bedding, papers,

plastic, clothes, curtains and other furnishings at least 3 feet away from the front, sides and rear of the heater

element.

Summary of Contents for Melrose Dark Cherry










