Derby cycle Pedelec Integrale 0.5 Original User Manual Download

Page: 59 / 64

Original User Guide | Pedelec Integrale 0.5 Version 1

EN-59

Fault

8.1

Drive unit, display and easy-reach control

Description

Cause

Remedy

Display does not light up and is not
functioning, no motor assist.

a) Battery is in Sleep mode.

a) Wake battery from Sleep mode



6.3.1.3 Sleep mode Page EN-51

. If the battery does not respond, briefly

connect it to the battery charger



7.3.1 Charging a battery Page EN-57

If the battery still does not respond or the LEDs flash in an unusual way, the battery is damaged and
must be removed from the charger.

b) Battery flat or defective.

b) Insert a new or fully charged battery



7.3.1 Charging a battery Page EN-57

c) Ambient temperature too

high/low.

d) The battery has a permissible operating temperature range of -10 to 40°C.

Speed display incorrect

a) Incorrect unit set.

a) Check the mph and km/h settings



5.11.5.3 BLOKS display 20: Settings Page EN-40

b) Wheel circumference setting
incorrect.

b) Set the correct wheel circumference - please contact your dealer for this.

The system will not turn on (no on-screen
display).

a) The battery is not firmly

seated in the holder.

a) Remove the battery from the holder and reinsert it, and plug in the connector if necessary.

b) Soiling

b) Check the charger plug and the battery socket carefully for deposits. If the plug or socket are magnetic,

metal particles will accumulate quickly. Unplug the charger from the mains and remove the deposits with a
soft, dry cloth.

c) Sleep mode

c) Press the battery button so that the LEDs light up.

No motor assistance (display available)

a) The battery is loose

a) Remove the battery from the holder and reinsert it. Plug in the connector again if necessary.

b) Battery not charged

b) Recharge the battery once completely.

c) The display is loose

c) Turn and remove the display from the mounting plate, wait approx. 1 minute and put it back on.

d) Cable break

d) Check that all connectors are correctly inserted, and check all cables for cable breaks, e.g. because of

excessive kinks.

e) Error message on the display

e) Is there an error message on the display? If yes, please contact your cycle dealer.

Summary of Contents for Pedelec Integrale 0.5

































































Search results

Summary of Contents for Pedelec Integrale 0.5

Reviews:

Related manuals for Pedelec Integrale 0.5

Brands by name

Popular brands

Derby cycle Pedelec Integrale 0.5, Original User Manual

Search results

Summary of Contents for Pedelec Integrale 0.5

Reviews:

Related manuals for Pedelec Integrale 0.5

Brands by name

Popular brands