Original User Guide | Pedelec Integrale 0.5 Version 1
EN-27
4.
Before every trip
DANGER
Replace any damaged (e.g. cracks, grooves) or bent components
before using the Pedelec again. Not doing so can lead to essential
parts failing and cause a serious fall.
Do not ride the Pedelec if it is not in a technically satisfactory
condition. If you are unsure, ask a cycle dealer to check it over.
We recommend asking your cycle dealer to assemble and adjust the
bike. Otherwise, components could become loose due to a faulty as-
sembly. If this happens whilst you are cycling, you could injure your-
self very seriously or even die.
Inspect your Pedelec before every trip, and after each time it has been
transported anywhere or left unattended. Use the following checklist to
help you.
Checklist
Type
Characteristics
Frame / forks
Check the frame and forks for visible warping, cracks and
damage.
Handlebars / front stem
Check they are seated securely.
Check that the bell is working and attached correctly and
securely.
Wheels
Check the condition (damage, foreign bodies), concentricity and
pressures of the tyres.
Type
Characteristics
The maximum permissible pressure is marked on
the side of a tyre in bar and psi (pounds per square
inch). Tyres should not be inflated above or below this
pressure.
Wheels
Check the valves are seated securely.
Visually inspect the rims for damage and wear.
Check that the through-axle is attached correctly and securely.
Chain
Check the chain, pinions and sprockets for wear and damage.
Brakes
Check that the brake system (including brake levers) is working
and attached correctly and securely.
Visual inspection of the brake pads/disks.
Lights
Check that the light system is adjusted and in working
condition.
Check that reflectors are affixed in accordance with applicable
national traffic regulations.
Threaded joints
Check that all threaded joints are tightened as specified.
Luggage
Check it is attached securely.
Battery
Check it is attached securely.
