EN-28
Original User Guide | Pedelec Integrale 0.5 Version 1
5.
Drive unit, display and easy-reach control
5.1
Safety information
DANGER
Do not let yourself become distracted by the display. If you do not ful-
ly concentrate on the traffic, you risk being involved in a serious acci-
dent or fall with fatal consequences.
WARNING
Do not attempt any modifications to the drive unit. For example,
it is not permitted to raise the cut-off speed above 25 km/h.
Furthermore, the speed of the push assist must not exceed 6 km/h.
Pedelec with modified drive power may no longer comply with the
legal requirements of the relevant country. You may be liable to
prosecution if you ride on public roads with a “tuned” Pedelec. There
is also the risk of a technical failure. Modified bikes of this type are
excluded from the warranty and guarantee.
WARNING
Always remove the battery before starting to work on the Pedelec. Ac-
cidental activation of the
button may lead to severe injuries.
CAUTION
Do not open the drive unit. There is a risk of electric shock. It will also
invalidate any warranty claim. Only have repairs to the drive unit car-
ried out by trained cycle dealers.
Do not touch the motor after a long downhill ride - it can become very
hot. You could burn yourself if you touch it.
PLEASE NOTE
All components mounted on the drive unit and all other drive
components may only be replaced with identical components or those
approved specially for your Pedelec by the manufacturer. Otherwise, it
may result in overloading and damage.
Do not open the display; you may damage it beyond repair.
At low temperatures, the display can react slowly. Note
the permissible ambient temperature in operation on the
display
5.2 Technical details Page EN-28
.
5.2
Technical details
Drive unit
Type
Brushless electric motor
Nominal power
250 Watt (650 Watt)
Nominal torque
12 Nm
Max. torque
40 Nm
Nominal voltage
36 V
