- 29 -
3-2
Installation
of
machine
WARNING
ENGINE
EXHAUST
can
kill.
■
Insufficient
ventilation
may
lead
to
death
due
to
lack
of
oxygen
or
poisoning
by
exhaust
gases.
*
Do
not
use
the
machine
in
a
place
of
poor
ventilation
or
in
a
place
where
exhaust
gases
stays.
*
Do
not
use
the
machine
indoors
or
in
storehouse,
tunnel,
ship
hold,
tank,
etc.
of
poor
ventilation.
*
If
it
becomes
necessary
to
use
the
machine
in
the
above
places,
the
exhaust
pipe
should
be
extended
to
a
well
ventilated
place.
In
this
case,
use
a
ventilator
to
ensure
proper
ventilation.
*
Do
not
direct
the
exhaust
outlet
to
nearby
pedestrians
and
houses.
[Note]
vibration:
The engine, running, generates vibration during operation of the machine.
When installing the machine, be sure to observe the following points.
①
Install the machine horizontally on a solid foundation.
Operation on an uneven place will generate unusual vibration.
②
The machine should be installed on a substantial base to prevent claims from nearby
living people. For details of the vibration level of the machine and foundation
work, contact distributor or our office.
[Note]
noise:
The engine is running during operation of the machine.
If the door is open, much noise will be generated. But some noise will stay, when
door is
closed.
When installing the machine, be sure to observe the following points.
* Close and lock the door after installation.
* We recommend to execute the measure for sound level to prevent claims from nearby
living people.
Summary of Contents for DCA-150LSKE
