6 Maintenance
Dentsply Sirona
Operating Instructions Primescan Connect
46
67 97 216 D3801
D3801.201.01.03.02 2022-09
6
Maintenance
WARNING
Danger of touching live parts
If the housing is damaged, there is a possibility of touching live parts
inside the unit.
➢ Check that the unit is intact. The unit can only be used for work
purposes if it is intact.
➢ If the housing is damaged, the unit must be put and left out of
operation until it has been professionally repaired.
NOTE
Regular inspection
Some countries have legal regulations which require regular safety
inspections of electrical devices or systems by the operator.
Dentsply Sirona would like to draw your attention to the fact that a so-
called "retest" (repeat test) must be carried out for the Primescan
Connect at least every three years. In addition, this retest also must
be performed following every repair or retrofit of components such as
the laptop, the laptop power supply unit, the Primescan scanner and
the scanner cable. and coupling box
NOTE
Maintenance performed by trained technical personnel is
recommended on at least an annual basis.
NOTE
Replacing components
A component can be replaced in accordance with the "Installation and
commissioning [→ 29]" section.
