Denso QK30-U, User Manual

Page: 58 / 114

47
Code 39
Code data read will be transmitted as is.
You can select whether or not to transmit start and stop codes ("*").
Interleaved 2of5/Standard 2of5
The scanner transmits code data read, starting from the character following the start code to the one preceding the stop
code. No start/stop codes will be transmitted.
Codabar (NW-7)
The scanner transmits code data read including the start/stop codes. You can select whether or not to transmit
ode 128 (GS1-128)
start/stop codes.
C
ner transmits code data read, starting from the character following the start code to the one preceding the
character
The scan
check digit. Start/stop codes, FNC codes, or check digit will not be transmitted. Note that FNC1 placed in
positions other than the 1st and 2nd ones from the start code will be converted to GS (1Dh) and transferred.
The conversion to the GTIN format is also selectable. For the GTIN format conversion, refer to Section 9.4.
Code 93
The scanner transmits code data read, excluding start and stop codes and a check digit.
GS1 DataBar
Code data read will be transm
he conversion to the GT
itted as is.
IN format is also selectable. For the GTIN format conversion, refer to Section 9.4.
nded Stacked(RSS Expanded Stacked),
rectional(RSS-14 Stacked Omnidirectional)
T
(Note)
GS1 DataBar includes:
GS1 DataBar Omnidirectional(RSS-14),
GS1 DataBar Truncated(RSS-14 Truncated),
GS1 DataBar Limited(RSS Limited),
GS1 DataBar Expanded(RSS Expanded),
GS1 DataBar Stacked(RSS-14 Stacked),
GS1 DataBar Expa
GS1 DataBar Stacked Omnidi