Denso QK30-U, User Manual

Page: 105 / 114

94
Function Control Commands Parameter Response
TR
See Parameter Details,
[5] given later.
OK/NG
(Note 2)
Specify the double-read prevention timeout.
MENULOCK
(Note 4) (Note 5)
None OK/NG
(Note 2)
Enable restriction on the use of QR-coded parameter
menu.
MENUUNLOCK
(Note 4) (Note 5)
None OK/NG
(Note 2)
menu.
Disable restriction on the use of QR-coded parameter
VER
Request for software version.
None Ver.n.nn
<Response from the scanner> Ver. n.nn
where n.nn is version number (Ex. Ver. 1.00)
IR None OK/NG
(Note 2)
Enable transmission of scanner ID.
IZ None OK/NG
(Note 2)
Disable transmission of scanner ID.
ID Non
Request for scanner ID (serial number)
e ID. nnnnnn
<Response from the scanner> "ID. nnnnnn"
where nnnnnn is a serial number (Ex. ID. 000001)
DLV
See Parameter Details,
OK/NG
(Note 2)
Spec
[6] given later.
ify the bar code scanning level (1 to 8).
PW
(Note 4) (N ote 5)
OK/N
e 2)
Save parameter values.
s settings made with control
d OFF.
None G
(Not
This command save
commands into the flash ROM. Without a PW command,
s settings made with control commands the scanner lose
when it is turne
IS
See Parameter Details,
[7] given later.
OK/NG
(Note 2)
Play back an audio data file specified by index, with the
mands in
succession, it plays back the audio data file specified by
specified playback volume.
If the scanner receives two or more IS com
the last command.
VOLSND
See Param tails eter De ,
[8] given
OK/N
e 2)
udio data file
later.
G
(Not
Specify the playback volume for an a
specified by index.
( 1) When the power is canner is rea .
If the scanner receives an R command, sends the code data read, and receives Z and R commands with a code being
applied to
the scanner, then it e the Z
command c ven cessing
(Note 2) If the scanner receives a control command successfully, it returns an "OK" response to the host. If the format or
parameter , th
(Note 3) The scanne ven displayed on a mobile'
( 4) To make the scanne ttings m co OM, do not turn the scanner power
OFF until the host r n "OK" o D r to malfunction.
( 5) These commands c settings i a s due to the restrictions on the
flash ROM.
( 6) The scanne s u
Note ON, the s dy to scan
the scanning window of
ancels the double-read pre
sends even the same code data twice. This is becaus
. tion pro
of the received control co
r can read codes e
mmand is invalid e scanner returns an "NG" response.
s LCD under some conditions.
Note r save se ade with control mmands into the flash R
eturns a r "NO" response. oing so may cause the scanne
Note an save nto the flash ROM maximum of 1,000,000 time
Note r can read codes even di played on a paper nder some conditions.