Denso QK30-U, User Manual

Page: 35 / 114

24
7.1.3 Data blocksorting mode
The scanner splits code data read into a maximum of 5 blocks at the specified separate positions, sorts those blocks in
the specified order, and outputs it in the data transmission format selected in the scanner (see Chapter 9, Section 9.3).
Note: The separate position must be specified by the number of digits from the head of code data read. Specifying the
number of digits exceeding that in the code data results in an error.
 Blocksorting conditions
Blocksorting conditions Choices
Any code
QR Code
iQR Code
PDF417
Data Matrix
MaxiCode
Aztec
UPC-A/EAN-13
UPC-E
EAN-8
Code 128
GS1-128
Codabar (NW-7)
Code 39
Code 93
Interleaved 2of5 (ITF)
Standard 2of5 (STF)
GS1 DataBar "Code type"
GS1 Composite symbols
Example Code read: Code 128, Data: 1234567890,
Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Disable,
Transmission of the number of digits: 4 digits, Prefix/Suffix: None, BCC: Disable
Separate position Order of blocks Output data
3rd position, 8th position Block 2, 1, 3 [STX]K00104567812390[ETX]
3rd position, 8th position Block 1, 3 [STX]K000512390[ETX]