Barcode Handy Terminal
“3: ITF”: Minimum number of digits to be read for ITF
“4: STF”: Minimum number of digits to be read for STF
“5: CODABAR”: Minimum number of digits to be read for Codabar
Set minimum number of digits for the code to be read.
Press [ ] to decrease the setting value and [ ] to increase the setting value.
ITF entry range:
2 - 20
(Default: 4)
STF entry range:
1 - 20
(Default: 3)
Codabar entry range:
3 - 20
(Default: 4)
Setting a small number of digits increases the frequency of missing digits when reading, or incorrectly
reading depending on how barcodes are read, or the quality of barcodes. On the other hand, setting a
large number will decrease the possibility of such errors.
[5]
Setting the communication environment
The communication environment settings following system initialization are follows.
Do not change these settings unless necessary.
Item Default
Interface port
Optical
(IrDA
interface
port)
Communication protocol
Ymodem
protocol
IrDA interface port
TRANSMIT SPEED
Baud rate
115200 bps
PROTOCOL
Protocol options
SERIAL
No.:
ON
(
Adds serial numbers to data
blocks.
)
H. PARITY:
ON (
Adds horizontal parity.
)
LINKUP TIME:
30
seconds
FIELD SPACE: Ignore (
Trim
)
71
Summary of Contents for BHT-805B
Page 1: ...Barcode Handy Terminal BHT 805B User s Manual...
Page 23: ...BHT 805B 10...
Page 157: ...BHT 805B 144...
