Denso BHT-805B, User Manual

Page: 63 / 179

BHT-805B
4.5 SYSTEM MENU
4.5.1 Executing Setup (SETUP Menu)
The BHT setup can be effectively executed using the BHT Setting and clone functions.
The following explains setup using two BHTs with the clone function. Use the procedure below for BHT
setup.
1.
Select “0: SETUP” at the SYSTEM MENU and then press the
ENT
key.
The screen displays as shown on the right.
“1: CLONE”:
Select to use two BHTs to create a BHT clone (s).
The clone function resembles the conventional HT-HT copy function,
but differs according to the points in the table below.
“2:BHT Setting”:
For details, refer to the “BHT Setting User’s Manual.”
Function Clone HT-HT Copy
OS Copy Available Not Available
Overwrite copy
(The file in the receiving device is overwritten
by the file from the transmitting device.)
Available Available
File Copy
Clone
(Files in both the receiving and transmitting
devices are identical.) [Default]
Available Not Available
General system setting values (excluding the
items below.)
Available Available
Password settings for wireless/FTP, etc. Available Not Available
OS Setting Values
Copy
IP characteristic value (only when “0.0.0.0")
copy
Available Not Available
Progressive display
Displayed for Each
Item
File Forwarding
Progression Only
Display
History (usage history) Available Not Available
Target clone selection (OS) Available Not Available
Post-function execution operations (reboot
designations, etc.) Designations
Available
No Designations
Available
Copy mode (overwrite/clone) Available Not Available
Setting Values
Authentication key (*1) Available Not Available
Operational
Environment
Communication settings
Fixed
（ IrDA: 460800 ）
Optional
(*1): The authentication key is protected due to password cloning for wireless/FTP, etc.
Press the
BS/C
key to return to the SYSTEM MENU.
50