BHT-805B
Message BHT
Response Cause
Solution
If this error occurs, the
warning tone beeps five
times.
During execution of
System Program, the
System Program has
received an invalid
command code.
(xxxxxxxx: Error address)
Unload and reload the
battery cartridge, then turn
the BHT on.
If this error occurs
frequently, make a note of
the displayed message and
codes and contact your
system administrator.
The message continues to
display.
When the BHT is turned
on, no user programs are
found.
Contact your system
administrator.
You can run the code
scanning demo without user
programs.
Pressing “1:Yes” runs the
code scanning demo.
Press the trigger switch to
start the code scanning
demo. Selecting “2:No” turns
the power off.
If this error occurs, the
warning tone beeps five
times and then turns itself
off.
Any of the hardware
error, memory error,
execution program error,
etc. has occurred.
(XXXX: Error code)
Turn the BHT on again. If
this error occurs frequently,
make a note of the displayed
code and contact your
system administrator.
The BHT displays this error
message and automatically
runs the execution program
from the point of start-up.
Operation was terminated
without turning OFF the
power normally with the
resume function set, and
therefore resume info has
been lost.
If this error occurs
frequently, make a note of
the displayed code and
contact your system
administrator.
148
Summary of Contents for BHT-805B
Page 1: ...Barcode Handy Terminal BHT 805B User s Manual...
Page 23: ...BHT 805B 10...
Page 157: ...BHT 805B 144...
