Denso BHT-805B, User Manual

Page: 116 / 179

Barcode Handy Terminal
3.
At the slave BHT to be tested, select “1: SLAVE”, and at the master
BHT, select “2: MASTER”. Then press the
ENT
key.
The screen displays as shown on the right during the test, and an IrDA
communication test is performed.
If an error occurs, the tested slave BHT speaker beeps three times and
displays the screen on the right.
The meanings of the error codes in parentheses are as follows.
( X X )
1:
The received data is different from the sent data.
2:
A timeout has occurred during standby for data
reception.
1: 9600 bps
2: 115200 bps
3: 460800 bps
Press the
BS/C
key to return to the TEST COMMUNICATION menu.
The master BHT automatically returns to the TEST COMMUNICATION
menu 10 seconds after the occurrence of an error.
Upon normal completion of the test, the tested slave BHT speaker beeps
once and displays the screen on the right.
Press the
BS/C
key to return to the TEST COMMUNICATION menu.
The master BHT automatically returns to the TEST COMMUNICATION
menu.
103