Barcode Handy Terminal
[9]
PING test
Use the following procedure to perform a PING test.
1.
Select “9: PING” at the TEST menu and then press the
ENT
key.
The TEST PING screen displays as shown on the right.
“1: RUN PING”:
Runs the PING test.
“2: SET PING”:
Displays the PING parameter setting screen.
“3: SET DEVICE”:
Displays the PING device setting screen.
Refer to the following section for details of the above items.
Press the
BS/C
key to return to the TEST menu.
“1: RUN PING” (PING Test Screen)
1.
Select “1: RUN PING” at the TEST PING menu and then press the
ENT
key.
The current setting values display, and the BHT waits for the transmission
count to be entered.
To change the number of echo requests displayed, enter the desired value
using the numerical keys.
To delete a single character, press the
BS/C
key. To delete the entire entry,
press and hold the
BS/C
key, or press the
SF
key and
BS/C
key
simultaneously.
2.
Press the
ENT
key.
When the PING test starts running, the message shown on the right
displays.
Press the
BS/C
key to abort the PING test.
105
Summary of Contents for BHT-805B
Page 1: ...Barcode Handy Terminal BHT 805B User s Manual...
Page 23: ...BHT 805B 10...
Page 157: ...BHT 805B 144...
