Denso BHT-805B, User Manual

Page: 160 / 179

Barcode Handy Terminal
Message BHT Response Cause Solution
The date and time settings
screen displays, awaiting
entry. The calendar clock
integrated in the BHT has
stopped because:
- the battery cartridge had
been removed for a
long time,
- the battery cartridge had
not been recharged for
a long time.
Set the current date and
time. (Refer to “Chapter 2
BHT Preparation” – “2.4
Initial Setup”)
The BHT displays this error
message and automatically
runs the execution program
from the point of start-up. Operation was terminated
without turning OFF the
power normally with the
resume function set, and
therefore resume info has
been lost. The application
restarts from the
beginning. If this error occurs
frequently, contact your
system administrator.
The message continues to
display. After shut down
abnormally, the BHT has
been left without the
battery cartridge loaded,
or with discharged battery
cartridge loaded, so
unsaved data was lost. Contact your system
administrator.
If this error occurs, the
warning tone beeps five
times. During execution of
System Program, the
System Program has
attempted to write onto
the write-protected area
of the memory.
(xxxxxxxx: Error address) Unload and reload the
battery cartridge, then turn
the BHT on.
If this error occurs
frequently, make a note of
the displayed message and
codes and contact your
system administrator.
147