manualshive.com logo in svg

Denso BHT-805B, User Manual

Share
Download
Denso BHT-805B User Manual Download Page 39

 

BHT-805B 

3.1 Reading Barcodes 

 
Follow the procedure below to read barcodes. 
 

1. 

  Turn the BHT power ON. 

 
 
 
 
 

Power key 

2. 

Press the trigger switch. 

The BHT emits a light for reading. 
 

Light 

−

 Point 

−

 

The trigger switch is assigned to magic 

keys 

M3

 and 

M4

 when shipped from the 

factory. 

 
 
 
 
 
 

3. 

Hold the BHT close to the barcode within the reach of 
light.   

When the BHT has read the barcode successfully, the 
indicator LED will illuminate in blue. 
 

−

 Point 

−

 

The barcode reading method may differ 

depending on the application. Select the 

most appropriate option in accordance 

with the User’s Manual. 

 
 
 

−

 Note 

−

 

 

If required, clean dirty labels before reading. 

 

It may not be possible to perform reading in direct sunlight. 

 

If the barcode is on a curved surface, perform reading in the center of the light for reading 

emission range. 

 

If the barcode reading window is pulled away from the barcode, the readable barcode range will 

become narrower than that of the light emission. 

 

26

 

Summary of Contents for BHT-805B




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands