Denso BHT-604Q, User Manual

Page: 165 / 184

153
2D Code Handy Terminal
Message BHT Response Cause Countermeasure
The BHT displays this error
message and automatically
runs the execution program
from the point of start-up.
Operation was terminated
without turning OFF the power
normally with the resume
function set, and therefore
resume info has been lost.
If this error occurs frequently,
make a note of the displayed
code and contact your system
administrator.
After displaying this error
message, the BHT may start a
user program other than the
preset auto-start execution
program or display the
message “No execution
program loaded.”
Your settings made in System
Mode contain an error.
Contact your system
administrator.
(If this error occurs, the System
Mode settings revert to the
factory defaults.)
If this error occurs, the BHT
beeps five times.
An error has occurred during
execution of System Program.
Unload and reload the battery
cartridge, then turn the BHT on.
If this error occurs frequently,
contact your system
administrator.