Denso BHT-604Q User Manual Download Page 106

Page: 106 / 184

BHT-604Q

“5: BARCODE”: Selecting enable/disable BARCODE reading

“1: EAN-13/UPC-A”:

Enable/disable EAN-13/UPC-A.

“2: EAN-8”:

Enable/disable EAN-8.

“3: UPC-E”:

Enable/disable UPC-E.

“4: ITF”:

Enable/disable ITF.

“5: CODABAR”:

Enable/disable CODABAR.

“6: CODE39”:

Enable/disable CODE39.

“7: CODE93”:

Enable/disable CODE93.

“8: CODE128”:

Enable/disable CODE128.

“9: RSS”:

Enable/disable RSS.

To change the setting, use the cursor keys ([

▲

] [

▼

]) or numerical keys ([1][2][3][4][5][6][7][8][9]) to

highlight the item to be set, highlight the setting value using the cursor keys ([

◄

] [

►

]), and then press the

ENT

key.

Press the [C] key to return to the detailed settings screen for the code reading test.

There are no setting items related to “4: MAXICODE” or “6: COMPOSITE”.

- Note -

Summary of Contents for BHT-604Q

























































































































































































Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands

Denso BHT-604Q, User Manual

Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands