Denso BHT-604Q User Manual Download Page 139

Page: 139 / 184

127

2D Code Handy Terminal

4.5.13 Downloading/Uploading the System Message File

(

The system message file is a file (file name: “_B60MSG.FN4”) used by the system to display messages

e ba

ssage file to the host computer and so on.

age file at another BHT.



ploading the System Message File

nt system message settin

computer and so on. After uploading, delete the created system message file.

the system message file

Receive the system message file from the host computer and so on to which it was backed up, and after

n protocol, and interface set at “[5] Setting the

ommunication environment” in section “4.5.5 System Environment Settings” are used when uploading

nd downloading.

- Supplement -

System messages are normally set when the BHT is shipped from the factory, and
therefore operation at this menu is unnecessary.

SYSTEM MESSAGE Menu)

such as “shutdown in progress. Do not remove the battery.” or “Charge th

ttery!”.

gs and upload it to the host

ownloading/Uploading the System Message File

(1) Upload the system me

(2) Download the uploaded system mess

Create a system message file based on the curre



Downloading

setting the stored system messages, delete the received system message file.

The communication parameters, communicatio

Use the following procedure to download and upload the system message file.

Press the

key while holding down the

key at the SYSTEM MENU.

The SYSTEM MESSAGE menu displays as shown on the right.

[1: Download]:

Downloads the system message file.

[2: UPLOAD]:

Uploads the system message file.

Refer to the following section for details of the above items.

Press the

key to return to the SYSTEM MENU.

Summary of Contents for BHT-604Q

























































































































































































Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands

Denso BHT-604Q, User Manual

Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands