Denso BHT-604Q, User Manual

Page: 113 / 184

101
2D Code Handy Terminal
[6] File test
Use the following procedure to perform a file test.
1.
Select “6: FILE” at the TEST menu and then press the ENT key.
- Point -

If a defective file is found, delete it or overwrite it with a file with
the same name.

Even defective files can be uploaded at the UPLOAD menu. It is
therefore recommended that important files be uploaded before
being deleted.
The screen displays as shown on the right, and If any of the files stored in
the memory is defective, an asterisk (*) or plus sign (+) is prefixed to the
name of the defective file (s).
Refer to “About ‘$$BRKLST.SYS’” in “2.5.4 If the BHT is shut DOWN
Abnormally” for details on the asterisk (*) and plus sign (+).
“SIZE: bbbbb”: Used memory size
“FREE: yyyyy”: available memory size
2.
Use the cursor keys ([
▲
] [
▼
]) to highlight a file.
If there are more than ten files, the screen can be scrolled.
3.
Press the ENT key.
The file name, file size, and test result (OK or NG) display as shown on the
right.
File Test Result
“OK”: No abnormalities
“NG”: Abnormalities exist
Press the C key to return to the TEST menu.