Denso BHT-604Q User Manual Download Page 150

Page: 150 / 184

138

BHT-604Q

5.2 IrDA Communication

The BHT has a built-in IrDA communication device that enables wireless transfer of programs and data both between

the BHT and the host computer and between BHTs without the need for a cable.

IrDA communication offers the following benefits over other forms of communication.



Communication without the need for a cable



High communication speed



Freedom from regulations and licenses that differ from country to country when using wireless devices

Communication is performed by arranging the BHT and other IrDA-compliant devices with their IrDA (infrared)

interface ports facing one another. The communication distance and angle and so on will differ depending on the

devices used. Refer to the instructions given in the manuals provided with such equipment.



Point



When communication is not possible, move the respective devices closer together or change the
angle of the IrDA interface ports and try again.

Summary of Contents for BHT-604Q

























































































































































































Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands

Denso BHT-604Q, User Manual

Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands