Denso BHT-604Q User Manual Download Page 133

Page: 133 / 184

121

2D Code Handy Terminal

4.5.10 Deleting Font Files (DELETE F

Delete font files stored in the FLAS

ILE Menu)

H ROM.

rea equal to the

an be secured.

Not displaying Japanese fonts at the user program:

Using only 16 dots or 12 dots at the user program:

When deleting font files, upload the font files to the host computer an so on to ensure that they are backed

Refer to section “4.5.3 Uploading Files (UPLOAD menu)” for details of uploading.

Use the following procedure to delete font files.

ress the

key while holding down the

key at the SYSTEM MENU.

he DELETE FILE menu screen displays as shown on the right.

ress the

key to return to the SYSTEM MENU.

he screen displays as shown on the right.

If there is insufficient user area, by deleting font files, a user a

size of the deleted font files

All font files can be deleted.

Font files that are not used can be deleted.

up.

Use the cursor keys ([

▲

] [

▼

]) to highlight the font file to be deleted.

Press the

ENT

key.

Summary of Contents for BHT-604Q

























































































































































































Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands

Denso BHT-604Q, User Manual

Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands