Denso BHT-1306B, User Manual

Page: 193 / 256

181
Barcode Handy Terminal
 Searching for services
1.
Select “2: BROWSE SERVICE
”
at the BROWSE DEVICE menu and
then press the
ENT
key.
The screen on the right is displayed.
[1: DO IT]:
Starts service inquiry.
[2: TIMEOUT]: Sets up the services inquiry time.
Press and hold the
BS/C
key to return to the BROWSE DEVICE menu.
2.
Use the cursor keys ([ ▲ ] [ ▼ ]) or numeric key ([2]) to highlight [2:
TIMEOUT] and then press the
ENT
key.
Entry mode is activated and the cursor is displayed.
3.
Use the numeric keys to enter the desired value.
Set up the service inquiry time to search services.
The service inquiry time is used only for the service search ([1: DO IT] menu).
Valid Range: 1 -255, Default: 30 seconds
Note that the setting specified here will not be saved.
To delete a single character, press and hold the
BS/C
key. To delete the entire entry, press and hold the
BS/C
key or press the
SF
and
BS/C
keys simultaneously.
4.
Press the
ENT
key.
5.
Use the cursor keys ([ ▲ ] [ ▼ ]) or numeric key ([1]) to highlight [1: DO
IT] and then press the
ENT
key.
The screen on the right is displayed.
The specified destination remote device is connected, and then the services
provided by the destination remote device are searched.
Press and hold the
BS/C
key to return to the BROWSE DEVICE menu.