background image

Ordering Information

Credential

 

technologies

Kit components

HHR-3152-GY 

(gray, UPC
816684007330) 

HHR-3152-WH 

(white, UPC 
816684007347)

Farpointe Prox, HID Prox, AWID Prox 
(125 kHz)

HHR-9052-GY / HHR-9052-WH Portable Proximity RF Card Reader/Dock

HHR-6400 Card Reader base interface

HHR-RCHL Card Reader charging unit 

HHR-3156-GY 

(gray,  UPC
816684007354) 

HHR-3156-WH 

(white, UPC 
816684007361)

HID Prox, EM4102, AWID Prox; 
ISO14443A/B ISO15693, FeliCa™ 
(IDm); MIFARE Classic®, MIFARE 
DESFire® 0.6, MIFARE DESFire® EV1 
(32 bit CSN), HID: iCLASS® Standard/
SE/SR/Seos; PIV II, Secure Identity 
Object® (SIO®)

HHR-9056-GY / HHR-9056-WH Portable Proximity RF Card Reader/Dock

HHR-6400 Card Reader base interface

HHR-RCHL Card Reader charging unit 

(HID Reader Module) Global Certifications: UL Recognition (Recognized Component) to UL294 for the USA and 
CSA C22.2 No. 205 for Canada. CE, FCC 47 Part 15 modular approval, RoHS, WEEE 

(HID Reader Module) Government Approvals: FIPS 201 PIV II with inclusion on GSA APL 

HHR-3157-GY 

(gray, UPC
816684007392) 

HHR-3157-WH 

(white, UPC 
816684007408)

Farpointe Sector, HID iClass® CSN/
UID Outputs (13.56 MHz) 

 

HHR-9057-GY / HHR-9057-WH Portable Proximity RF Card Reader/Dock

HHR-6400 Card Reader base interface

HHR-RCHL Card Reader charging unit 

HHR-3150_201026

Applications: 
• Rapid disaster deployment 
• Handheld relay control for security officer 

empowerment (use for functions such as           
entrance / exit control or possible duress notifications) 

• Random ID challenges  
• Security officer booth / ID checks in trucks and buses 
• Staff enrollment / asset tracking 
• Mustering / emergency assembly points

HHR-3150 Series System 

Handheld Wireless Reader Kit

with dual Wiegand output 

Product Manual

Cypress Integration Solutions      35+ Years of Access Control Ingenuity      CypressIntegration.com 

© 2020 

Summary of Contents for HHR-3157















Reviews: