Denso BHT-1306B, User Manual

Page: 102 / 256

90
BHT-1300B series
2.
Use the cursor keys ([ ▲ ] [ ▼ ]) or numerical keys ([1] [2] [3] [4]) to select the item to be set and
press the
ENT
key.
3.
Press the
ENT
key or
BS/C
key to make the settings value valid and then return to the OPEN
BAR SETTING screen.
[2] BUZZER/LED control
1.
Select “2: BUZZER/LED” at OPEN BAR SETTINGS and then press
the
ENT
key.
The Buzzer/LED control settings screen is displayed.
The highlighted settings are the current settings.
“1: BUZZER”:
Enable to set Buzzer/Vibrator beeping when a read of a code is
successful.
“ON”: Buzzer/Vibrator beeps when a read of a code is
successful.
“OFF”: Buzzer/Vibrator does not beep when a read of a code is successful.
“2: LED”:
Enable to set LED illuminations when a read of a code is successful.
“ON”: LED lights in blue when a read of a code is successful.
“OFF”: LED does not light when a read of a code is successful.
2.
Use the cursor keys ([ ▲ ] [ ▼ ]) or numerical keys ([1] [2]) to select the item to be set and press
the
ENT
key.
3.
Use the cursor keys ([
◄ ] [ ► ])
to select settings value.
4.
Press the
ENT
key or the
BS/C
key for the settings value to be valid and then return to the
OPEN BAR SETTING screen.