Denso BHT-1306B, User Manual

Page: 216 / 256

204
BHT-1300B series
[2] Updating the CU-1311 system
Update the CU-1311 system after downloading the CU-1311 system update file.
(Refer to Chapter 4.2.2 “CU-1311 System Update” for details.)
1.
Use the cursor keys ([ ▲ ] [ ▼ ]) or numerical key ([2]) to highlight
[2: CU-F/W MODIFY] and then press the
ENT
key.
The CU-F/W MODIFY menu screen on the right is displayed.
[1: DO IT]:
Updates the CU-1311 system.
[2: FILENAME]:
Displays the filename to be used for updating the CU-1311 system.
Press and hold the
BS/C
key to return
to the SYSTEM PARAMETER
menu.
2.
Use the cursor keys ([ ▲ ] [ ▼ ]) or numerical key ([1]) to highlight
[1: DO IT] and then press the
ENT
key.
The CU-1311 system is updated.
The screen on the right is displayed upon completion of the update.
Press and hold the
BS/C
key to return to the CU-F/W MODIFY menu.

When the Displayed File Name Differs from the CU-1311 System Update File
If the name of the file displayed at [2: FILENAME] differs from the name of the CU-1311 system update file
to be used for updating the system, enter the correct file name.
1.
Use the cursor keys ([ ▲ ] [ ▼ ]) or numerical key ([2]) to highlight [2: FILENAME] and then press
the
ENT
key.
The mode changes to entry mode and the cursor is displayed.
2.
Use the numerical keys and dot key to enter the correct file name.
Press the
SF
key to change the entry mode (numerical entry (no guidance display) and alphabet entry).
To delete a single character, press the
BS/C
key. To delete the entire entry, press and hold the
BS/C
key,
or press the
SF
key and
BS/C
key simultaneously.
3.
Press the
ENT
key to set the entered file name.