Denkovi SmartDEN IP-32IN, User Manual

Page: 61 / 66

SmartDEN IP-32IN User Manual
17 Jan 2018
-61-
10. SNMP access
SmartDEN IP-32IN supports SNMP snmpget and snmpset commands. Most of
the parameters can be configured/read via these commands. Read-only community
string is used for reading and Read-Write Community String is used for changing the
parameters. Parameters that can be changed, are grouped according to their
functions in the tables below. To obtain a valid OID number it is necessary to replace
the "
x " symbol with the prefix " .1.3.6.1.4.1.42505 ". Also all the snmp commands are
described in the MIB file .
During SNMP access, it must be used snmpget and snmpset only to one
OID and not to group of OIDs.
10.1. Product
Table 9. Product OID-s
OID Name Access Description Syntax
x .7.1.1.0 Name read-only Description of the module
DISPLAYSTR
ING
x .7.1.2.0 Version read-only Current firmware version
DISPLAYSTR
ING
x .7.1.3.0 Date read-only
Current firmware version
build date DISPLAYSTR
ING
10.2. Setup
Table 10. Digital Inputs OID-s
Start OID End OID Name Access Description Syntax
x .7.2.1.1.2.0 x .7.2.1.1.2.15
DigitalInput
Description read-
write
Digital Input
Description
(maxlen=7) DISPLAYSTRI
NG (SIZE
(0..7))
x .7.2.1.1.3.0 x .7.2.1.1.3.15
DigitalInput
Counter read-
write
Digital Input
Counter
(0..65535)
INTEGER32
(0..65535)
x .7.2.1.1.4.0 x .7.2.1.1.4.15
DigitalInput
Filter read-
write
Digital Input
Filter (0..200),
ms
INTEGER
(0..200)
x .7.2.1.1.5.0 x .7.2.1.1.5.15
DigitalInput
TrapEnabl
ed
read-
write
Digital Input
Trap Enable
Flag
(Disabled-0,
Enabled-1)
INTEGER {
no(0),yes(1) }
x .7.2.1.1.6.0 x .7.2.1.1.6.15
DigitalInput
TrapValue read-
write
Digital Input
Trap Value
(off-0, on-1,
both-2)
INTEGER {
closed(0),open(
1),both(2) }
x .7.2.1.1.7.0 x .7.2.1.1.7.15
DigitalInput
State
read-only
Digital Input
State (off-
0,on-1) INTEGER {
closed(0),open(
1) }