Denkovi SmartDEN IP-32IN, User Manual

Page: 46 / 66

SmartDEN IP-32IN User Manual
17 Jan 2018
-46-
Figure 45. Sending tarps with Traps Sending = "Level Triggered"
o
If Traps Sending parameter from web page " SNMP Traps Settings " is set
to " Edge Triggered " and if the rising Temperature Input value the High
Threshold or the falling Temperature Input value crosses the Low
Threshold, a single trap will be sent (Fig. 46);
Figure 46. Sending tarps with Traps Sending = "Edge Triggered"
o
When the parameter Low Threshold is changed and the Temperature
Input value is less or equal than the new value of Low Threshold ;
o
When the parameter High Threshold is changed and the Temperature
Input value is greater or equal than the new value of High Threshold ;

Remote Relay Control - this is the remote relay number "attached" to this
Temperature Input from the remote network device selected from the list from
page "Remote Services". Commands for
Remote Relay Control are sent:
o
When the Temperature Input value is less or equal than Low Threshold ;
o
When the Temperature Input value is greater or equal than High
Threshold ;
o
When parameter Low Threshold is changed and the input value is less or
equal than Low Threshold ;