Denkovi SmartDEN IP-32IN, User Manual

Page: 59 / 66

SmartDEN IP-32IN User Manual
17 Jan 2018
-59-
</TemperatureInput1>
<TemperatureInput2>
<Name>TI2</Name>
<Value>---</Value>
</TemperatureInput2>
<TemperatureInput3>
<Name>TI3</Name>
<Value>---</Value>
</TemperatureInput3>
<TemperatureInput4>
<Name>TI4</Name>
<Value>---</Value>
</TemperatureInput4>
<TemperatureInput5>
<Name>TI5</Name>
<Value>---</Value>
</TemperatureInput5>
<TemperatureInput6>
<Name>TI6</Name>
<Value>---</Value>
</TemperatureInput6>
<TemperatureInput7>
<Name>TI7</Name>
<Value>---</Value>
</TemperatureInput7>
<TemperatureInput8>
<Name>TI8</Name>
<Value>---</Value>
</TemperatureInput8>
<Device>
<Name>SMARTDEN-IP32IN</Name>
<MAC>E8:EA:DA:00:18:B7</MAC>
</Device>
</CurrentState>
9.2. Remote Relay Control mode
This mode allows you to control relays over the local network or Internet from
some SmartDEN IP-32IN input up on input event like analog/temperature value
threshold crossing or changing digital input value. SmartDEN IP-32IN sends specific
HTTP GET message to the selected remote relay board.
Remote Relay Control mode is adjusted from the "Remote Services
Settings" web page -> "Remote Relay Control" section.