Denkovi SmartDEN IP-32IN, User Manual

Page: 43 / 66

SmartDEN IP-32IN User Manual
17 Jan 2018
-43-
Figure 40. Sending tarps with Traps Sending = " Level Triggered "
o
If Traps Sending parameter from web page " SNMP Traps Settings " is set
to " Edge Triggered " a single trap is sent when measured value crosses
over the High Threshold or below the Low Threshold values (Fig. 41).
Figure 41. Sending tarps with Traps Sending = "Edge Triggered"
o
When the parameter Low Threshold is changed and the Analog Input
measured value is less or equal than the new value of Low Threshold ;
o
When the parameter High Threshold is changed and the Analog Input
measured value is greater or equal than the new value of High Threshold ;

Remote Relay Control - this is the remote relay number "attached" to this
analog input from the remote network device selected from the list from page
"Remote Services". Commands for
Remote Relay Control are sent:
o
When the Analog Input measured value is less or equal than Low
Threshold ;
o
When the Analog Input measured value is greater or equal than High
Threshold ;