Denkovi SmartDEN IP-32IN, User Manual

Page: 39 / 66

SmartDEN IP-32IN User Manual
17 Jan 2018
-39-
every 5 seconds. If the parameter Trap Sending is set with value "Edge
Triggered" then the trap message is sent during the Digital Input's rising
edge (0->1); In this mode the counter will be increased when the Digital
Input value transits from 0 to 1.
Figure 35. Traps and counter when SNMP Trap Value is "1 (on)"
o
2 (Both) - If the parameter Trap Sending is set with value "Level
Triggered" then the trap message is sent constantly every 5 seconds. If
the parameter
Trap Sending is set with value "Edge Triggered" then the
trap message is sent every time when the Input changes its state (falling
and rising edge). In this mode the counter will be increased when the
Digital Input value transits from 1 to 0 and from 0 to 1.