Denkovi SmartDEN IP-32IN, User Manual

Page: 26 / 66

SmartDEN IP-32IN User Manual
17 Jan 2018
-26-
6.2. Steps for loading default settings
When necessary, the factory (default settings) may be applied so the module
parameters will be returned back as those in
point 6.1 from the current document.
Figure 22. Loading the default settings
1. Turn off the power supply of the device;
2. Press and hold the default button;
3. Turn on the power supply of the device;
4. Wait for until STATUS led indicator become ON (approximately after 10 sec);
5. Release the default button;
6. The module is configured with default settings.