SmartDEN
IP-32IN
User Manual
17 Jan 2018
-33-
Note:
When
Encrypt Password
mode is enabled, the
Multiple Access
option is
not taken into account and, at any given moment, only one user can be logged-in.
Note:
When
Multiple Access
mode is enabled, any XML/JSON request will
always reset the current HTTP session.
Note:
When
Multiple Access
mode is disabled, whether
Encrypt Password
is
enabled or not, it is possible to access the module via XML/JSON only after login for
the specified session timeout.
You have to reboot the device for these settings to apply.
It is highly recommended to log out from the web server after finishing the
parameters setup.
If you don’t want to restrict the HTTP/XML/JSON access by IP address,
set the
Access Mask
to 0.0.0.0.
If you don’t want to restrict the HTTP/XML/JSON access by MAC address,
set the MAC
Address
to 00:00:00:00:00:00.
Setting the
Access Mask
to 255.255.255.255 allows the HTTP/XML/JSON
access only from the exactly specified
Access IP Address
.
You can allow the HTTP/XML/JSON access to a range of IP addresses by
setting an appropriate value for
Access Mask
. For example setting the
Access IP Address
to 192.168.1.0 and
Access Mask
to 255.255.255.0
allows the access from IP addresses in range from 192.168.1.0 to
192.168.1.255.
Summary of Contents for SmartDEN IP-32IN
