DAEnetIP3
User Manual
-
46
-
10.4.4.
Example 4: Configuration “5 to 1” over LAN
This example (figure 42) shows how 5 controllers with a temperature sensor can
control one controller with outputs over the LAN. That‟s why the configuration is
called “5 to 1”. This is the maximum controllers that may control another DAEnetIP3.
Note that each controlling DAEnetIP3 has different Remote Port parameter
–
1005,1006,1007, 1008, 1009 and they are in the local port range of the controlled
DAEnetIP3.
Each of the five controlling DAEnetIP3 [2…6] have one analog input “attached” to
5 (totally) digital outputs of the controlled DAEnetIP3 [1].
In this mode it is possible to measure 5 different temperatures in 5 points and set
relays of a single relay board.
Figure 42.
Configuration 5 to 1 over LAN
Table 12.
Example 4 settings
