DAEnetIP3
User Manual
-
109
-
23.
Appendix 6. Reset the controller
23.1.
Hardware (1)
Unplug the power supply carefully.
Wait 10 seconds.
Plug the power supply.
23.2.
Hardware (2)
Connect Pin 1 and Pin 2 of system port. It is recommended connecting these
pins with switch or button, avoiding the possibility of touching DAEnetIP3
tracks while working.
Disconnect the Pin 1 and Pin 2 of system port.
23.3.
Reset via Web
Web browser -> System -> Reset
23.4.
Reset via UART command
Send to UART port: AA
YRT=1
; Where the AA is the serial address, YRT=1 is the
function code for default settings and “;” is the delimiter.
23.5.
Reset via Telnet command
Send to UART port:
YRT=1
; Where YRT=1 is the function code for default
sett
ings and “;” is the delimiter.
23.6.
Reset via DAEnetIP3 socket command
Send to UART port: AA
YRT=1
; Where the AA is the serial address, YRT=1 is the
function code for default settings and “;” is the delimiter.
