DAEnetIP3
User Manual
-
23
-
determined by the field „Time1‟ and Time 2 by „Time2‟ from the configuration web
page. The user can not control manually the outputs in this mode.
7.5.5.
On/Off setting and remote
In this mode the output can be controlled by input (digital or analog) from another
DAEnetIP3 controller over the network. The user can not control manually the
outputs in this mode.
7.5.6.
Inverting
In this mode the user is able to invert the digital outputs. If the previous output
state was 0, after inverting it will be 1 and vices versa.
Figure 17
. Inverting
7.5.7.
Inverting and digital input
In this mode (figure 18) the digital outputs are inverted by falling/rising slope of
some digital input. The user can not control(invert) manually the output state in this
mode.
When DI is in “Set output during rising slope” mode, the DO state is
inverted during rising slope of the DI level.
When DI is in “Set output during falling slope” mode, the DO state is
inverted during falling slope of the DI level.
