DAEnetIP3
User Manual
-
45
-
Figure 41
. Distributed mode
– example 3
Table 11.
Example 3 settings
DAEnetIP3 [1] (inputs)
Network Settings
Eth IP address = 192.168.1.100
Eth Mask = 255.255.255.0
Eth GW = 192.168.1.1
Remote Server IP:Port = 192.168.1.101:1005
Working mode = Ethernet 10/100 Mbit
Analog Input 1 (Port C
– Pin 1)
Refresh=1, LT=100,HT=150,LH=10,HH=10, Mode
= Low, PortA Pin = Pin 1, Remote = true
Digital Input 1 (Port B
– Pin 1)
Mode = Set output during rising slope, PortA Pin =
Pin 2, Remote = true
DAEnetIP3 [2] (outputs)
Network Settings
Eth IP address = 192.168.1.101
Eth Mask = 255.255.255.0
Eth GW = 192.168.1.1
Local Port Range = 1005:1009
Digital Output 1 (Port A - Pin 1)
Mode = On/Off setting and remote
Digital Output 2 (Port A - Pin 2)
Mode = On/Off setting and remote
Router Settings
IP address = 192.168.1.1
