6 Planning the installation
Installation and Operating Manual for RPI M15A M20A Solar Inverter V1.0 2016-03-18
22
6.
Planning the installation
This chapter is intended only as an aid to
plan-
ning
the installation work. The
implementation
of the installation work and the associated dan-
gers are described in the chapter “Installation”.
6.1 Installation location
Fig. 6.1:
Installation location – condition of the wall
► The inverter is very heavy. The wall must be able to bear the
heavy weight of the inverter.
► Always use the mounting plate that is supplied with the
inverter.
► Use mounting materials (wall plugs, screws, etc.) that are
suitable for the wall or the mounting system as well as the
heavy weight of the inverter.
► To prevent malfunctions, mount the inverter on a vibration-
free wall.
► When the inverter is used in residential areas or in buildings
with animals, possible noise emissions may cause a distur-
bance. Therefore take care when choosing the mounting
location.
► Mount the inverter on a fire-resistant wall.
✔
✘
✘
??
??
Fig. 6.2:
Mounting location – installation height
► Mount the inverter so that the information on the display can
be read without difficulty and the buttons can be operated.
6.2 Mounting position
Fig. 6.3:
Mounting position
► Mount the inverter vertically.
