43
Installation and Operating Manual for RPI M15A M20A Solar Inverter V1.0 2016-03-18
6 Planning the installation
Part
Quantity
Description
DC protective caps
Up to 8
To secure the DC plugs so that they can only be removed from the DC termi-
nals with the DC open end spanner. Available from Multi-Contact.
Comply with the local regulations concerning the use of the DC protective
caps.
France: The DC protective caps must be used.
DC open end spanner
1
Open end spanner for disconnecting the DC plugs and the protective caps
from the DC terminals. Available from Multi-Contact.
6.14.4 To ground the inverter housing
Part
Quantity
Description
Grounding cable with terminal lug
1
Typically a yellow-green copper cable with a cross-section of at least 6 mm
2
.
M4 screw, spring washer, flat washer and serrated washer are already fitted
to the inverter.
Always comply with the local regulations regarding the requirements for the
grounding cable.
6.14.5 To wire up the RS485 and the dry contacts
Part
Quantity
Description
Cable
-
Twisted and shielded cable (CAT5 or CAT6) with a cable diameter of 5 mm
and a wire cross-section of 1 mm
2
.
SOLIVIA Gateway M1 G2
1
For connecting to SOLIVIA Monitor, the internet-based monitoring system
from Delta.
