Delta DVS-G928 series, User Manual

Page: 16 / 206

D V S L a y e r 3 G i g a b i t M o d u l a r Ma n a g e d I n d u s t r i a l E t h e r n e t S wi t c h U s e r M a n u a l
2 - 4
_2
2.2 Telnet Console Configuration
A Delta Layer 3 managed switch supports the telnet server function; it can be globally enabled or disabled. The user can
use all CLI commands over a telnet session. The maximum number of inbound telnet sessions allowed on the switch can
be configured to 0-5. The inactivity timeout value for the incoming Telnet sessions for the switch can be configured to
1-160 minutes. The login authentication supports the local user method or the remote user method which is configured.
When the login authentication is the remote user method, it supports RADIUS and .
1. Open a Command Prompt window and input “telnet 192.168.1.X” to login to a Delta switch.
2. After entering a user name and a password, you can use the CLI command to control the switch.
Note:
1. The IP Address by default is 192.168.1.5
2. The default user name is “admin” and the password is blank.