Delta DVS-G928 series, User Manual

Page: 109 / 206

C h a p t e r 3 F e a t u r e d F u n c t i o n s
3 - 9 1
_3
Description Factory default
Auth Port
The authentication port which specifies the UDP port used to connect the
RADIUS server for authentication. The default is 1812.
1812
Acct Port
The UDP port to use on the RADIUS accounting server. If the port is set to 0
(zero), the default port (1813) is used on the RADIUS accounting server.
1813
Timeout
The time to wait for the RADIUS server to respond. None
Retransmit
The number of times the switch tries to connect to a RADIUS server. None
Key
The shared secret between the switch and the RADIUS server. None
3.9.4.2

Global Configuration
Description Factory default
Timeout
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply
from a server before it is considered to be dead.
5
Deadtime
Deadtime, which can be set to a number between 0 to 1440 minutes, is the period
during which the switch will not send new requests to a server that has failed to
respond to a previous request. This will stop the switch from continually trying to
contact a server that it has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
0
Key
The secret key - up to 63 characters long - shared between the
server and the switch.
None

Server Configuration