Delta DVS-G928 series, User Manual

Page: 48 / 206

D V S L a y e r 3 G i g a b i t M o d u l a r Ma n a g e d I n d u s t r i a l E t h e r n e t S wi t c h U s e r M a n u a l
3 - 3 0
_3
3.3.4.1 Configuration

Global Configuration
The module status of Loopback- Detection Global Configuration is used to enable/disable the Loopback-Detection
feature.
Description Factory default
Enable Loopback-Detection
Specify whether the status in global configuration is activated or not. Disable
Transmission Time
The interval between each loop protection PDU sent on each port valid values
are 1 to 10 seconds.
5
Shutdown Time
The period (in seconds) for which a port will be kept disabled in the event of a
loop is detected (and the port action shuts down the port). Valid values are 0 to
604800 seconds (7 days). A value of zero will keep a port disabled (until next
device restart).
180

Port Configuration
The parameters of Loopback-Detection should be set for each port.
Notice:
If you need to configure Loopback-Detection Port Configuration, you must enable the Loopback-Detection
Global mode.