Delta DVS-G928 series, User Manual

Page: 36 / 206

D V S L a y e r 3 G i g a b i t M o d u l a r Ma n a g e d I n d u s t r i a l E t h e r n e t S wi t c h U s e r M a n u a l
3 - 1 8
_3

NTP Configuration
Description Factory default
Mode
Specify whether the switch works as a SNTP client or a SNTP server.

Disable : The switch does not operat in NTP mode.

Client : The switch works as an SNTP client mode.

Server : The switch works as an SNTP Server mode.
Disable
Server
Specify a type of SNTP server IP address. None
Date
The date parameter format is DD/MM/YYYY.
When an SNTP client is disabled, you can manually set the date. When an SNTP
client is enabled, the field is grayed out.
YYYY-MM-DD
Time
The time parameter format is HH:MM:SS. When an SNTP client is disabled, you
can manually set the time. When an SNTP client is enabled, the field is grayed out.
HH:MM:SS
3.1.14 MODBUS TCP
The module status of MODBUS TCP is used to enable/disable the MODBUS TCP feature. If you need to set parameters,
please refer to Appendix B MODBUS TCP Map.
3.1.15 EtherNet/IP
The module status of EtherNet/IP is used to enable/disable the EtherNet/IP feature. If you need to set parameters, please
refer to Appendix C EtherNet/IP.
Note:
Since Ethernet/IP devices can generate a lot of multicast traffic, users are recommended to enable
IGMP snooping to avoid overloading.
3.1.16 Backup
The Delta switch supports uploading the configuration to a local host.