Delta DVS-G928 series, User Manual

Page: 69 / 206

C h a p t e r 3 F e a t u r e d F u n c t i o n s
3 - 5 1
_3
Description Factory default
Delete
Check to delete the entry. It will be deleted during the next save. Unchecked
Community
Entering the community access string to permit access to SNMPv3 agent. The
allowed string length is 1 to 32, and the allowed content is the ASCII characters
from 33 to 126.
None
Source IP
Entering the SNMP access source address. 0.0.0.0
Source Mask
Entering the SNMP access source address mask. 0.0.0.0
3.6.4 Users
Configure SNMPv3 users table on this page. The entry index keys are Engine ID and User Name.
Description Factory default
Delete
Check to delete the entry. It will be deleted during the next save. Unchecked
Engine ID
Entering the SNMPv3 engine ID. The string must contain an even number between
10 and 64 hexadecimal digits, but all-zeros and all-'F's are not allowed. Change of
the Engine ID will clear all original local users.
None
User Name
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 32, and the allowed content is the ASCII characters from 33 to
126.
None
Security Level
Specify the security level that this entry should belong to.

NoAuth, NoPriv: None authentication and none privacy.

Auth, NoPriv: Authentication and none privacy.

Auth, Priv: Authentication and privacy.
Note:
The value of security level cannot be modified if entry already exists.
NoAuth, NoPriv
Authentication Protocol
Specify the authentication protocol.

None: None authentication protocol

MD5: An optional flag to indicate that this user is using MD5 authentication
protocol.

SHA: An optional flag to indicate that this user is using SHA authentication
protocol.
None