Delta DVS-G928 series, User Manual

Page: 26 / 206

D V S L a y e r 3 G i g a b i t M o d u l a r Ma n a g e d I n d u s t r i a l E t h e r n e t S wi t c h U s e r M a n u a l
3 - 8
_3

Auth Method
Description Factory default
Client
The management client for which the configuration below applies. Fixed
Authentication Method
Method can be set to one of the following values:

No: Authentication is disabled and login is not possible.

Local: A locally stored user ID and a password are used for the authentication.
This is the default setting. You need to set up a user account on the Local
User Management page.

RADIUS: The user ID and the password are authenticated through a RADIUS
server.

: The user ID and the password are authenticated through a
server.
Local
Fallback
If there is not any confiugured authentication server consist, the local user
database is used for authentication.
Note:
This is only possible if the Authentication Method is set to a value
other than 'none' or 'local'.
None
3.1.5 IP Setting
You can configure a static IP address, a subnet mask and a default gateway for the switch. Or you can enable DHCP
mode for receiving a dynamic IP address, a subnet mask and a default gateway.
Note:
The default Current Network Configuration Protocol is None. And the default IP address is
192.168.1.5 .

IP Setting
Description Factory default
Mode
Configure whether the IP stack should act as a host or a router. In Host mode, IP
traffic between interfaces will not be routed. In Router mode traffic is routed
between all interfaces.
Router