Turbo PMAC Clipper
Connections and Software Setup
15
RECEIVING AND UNPACKING
Delta Tau products are thoroughly tested at the factory and carefully packaged for shipment. When the
Turbo PMAC Clipper is received, there are several things to be done immediately:
Observe the condition of the shipping container and report any damage immediately to the
commercial carrier that delivered the board.
Remove the Turbo PMAC Clipper from the shipping container and remove all packing materials.
Check all shipping material for connector kits, documentation, or other small pieces of
equipment. Be aware that some connector kits and other equipment pieces may be quite small
and can be accidentally discarded if care is not used when unpacking the equipment. The
container and packing materials may be retained for future shipment.
Verify that the part number of the board received is the same as the part number listed on the
purchase order.
Inspect for external physical damage that may have been sustained during shipment and report
any damage immediately to the commercial carrier that delivered the board.
Electronic components in this product are design-hardened to reduce static sensitivity. However,
use proper procedures when handling the equipment.
If the Turbo PMAC Clipper is to be stored for several weeks before use, be sure that it is stored in
a location that conforms to published storage humidity and temperature specifications.
Use of Equipment
The following restrictions will ensure the proper use of the Turbo PMAC Clipper:
The components built into electrical equipment or machines can be used only as integral
components of such equipment.
The Turbo PMAC Clipper must not be operated on power supply networks without a ground or
with an asymmetrical ground.
If the Turbo PMAC Clipper is used in residential areas, or in business or commercial premises,
implement additional filtering measures.
The Turbo PMAC Clipper may be operated only in a closed switchgear cabinet, taking into
account the ambient conditions defined in the environmental specifications.
Delta Tau guarantees the conformance of the Turbo PMAC Clippers with the standards for industrial
areas stated in this manual, only if Delta Tau components (cables, controllers, etc.) are used.
Summary of Contents for Turbo PMAC Clipper
